Lathund Terminal Umeå

Call the terminal 15 minutes before arrival.
Register your arrival by scanning the QR code.
Upon arrival during unstaffed hours, press the “Jouren” button on the keypad by the door.
It is crucial to return the tag where it was taken.

Checklist after arrival during staffed hours

Call (0709–595652) to inform the terminal about loading or unloading. Ports will be assigned thereafter.
Leave freight documents at the terminal office.
Unload the goods at the designated location.
Any discrepancies should be reported to terminal personnel, who will then document them.
After unloading is complete, park the truck in the truck room and move the equipment so that the next unloading can begin.

Please note that safety shoes are mandatory if you are staying at the terminal!

Check the settings on the unit and ensure that the cargo space is properly chilled. Refer to the instructional videos in the driver app.
Retrieve the loading list from the terminal office. If the loading list is missing, notify terminal personnel.
Check the goods against the loading list to ensure that you are loading the correct shipments, and mark the shipments loaded onto the vehicle.
Does the number of transport units (pallets, boxes, etc.) match the loading list?
Are there any damages to the goods? Is everything clean and intact?
If there is suspicion of temperature deviation, perform a temperature check.
In case of discrepancies, missing goods, or other issues, contact terminal personnel or traffic supervisors before registering the deviation.
Submit the reconciled loading list to the terminal office after loading is completed.
Retrieve the freight documents from the document pockets and ensure that you take documents for all the shipments you have loaded.
Scan the goods on the correct vehicle using the driver app: Loading terminal
Park the truck in the truck room when loading is complete.
Before leaving the terminal area, remember to check out via the QR code at the office or exit gate.
(Your registration remains in the same browser you used to check in.)

Don’t forget to verify that your units are properly set up before starting the drive.

Checklist for unstaffed hours

Upon returning to the port, leave or retrieve freight documents at the terminal office.
Unload or load the goods at the designated location.
Ensure that everything is correct.
Any discrepancies should be checked and recorded immediately in the app.
Scan your goods for “unloading” or “loading” in the app.

Open
Sunday 22.00- Friday 15.00
Tel nr 0709-595652

Traffic office / DC STO
Mån – Fre 07:00-17:00
0841080159

Jouren inrikes
0102799949

Terminal Västerås