Unloading at DC6 Jordbro Terminal

– There are 2 gates, one for entry and one for exit. Note that it is one-way, as indicated by signs.

– Register your arrival by scanning the QR code.

Checklist Upon Arrival During Staffed Hours:

1. Notify your arrival to the traffic office.
2. Submit the shipping documents for the goods you will be unloading to the terminal admin/traffic.
3. Bring a printed unloading list from the terminal/admin/traffic.
4. Check if your transport company is on the existing gate schedule below. If so, back up to the designated gate according to the schedule.

– If not, back up to the assigned gate as directed by terminal staff.

5. After returning the unit, hand over the unloading list to terminal staff.
6. If you borrow a forklift, charge the forklift after you’re finished.
7. Note that safety shoes are mandatory if you need to be on the terminal premises.

Loading Instructions at DC6 Jordbro Terminal:

1. Check the unit settings and pre-cool the cargo area; refer to the instructional videos in the driver app.
2. Retrieve the loading list from the document slots at the terminal desk.
3. Verify the goods against the loading list to ensure you load the correct shipments, checking off the shipments as they are loaded onto the vehicle.

– Ensure the number of transport packages (pallets, boxes, etc.) matches the loading list.

– Check for any damages to the goods; they should be intact and clean.

– If there is any suspicion of a temperature deviation, perform a temperature check.

– In case of discrepancies, missing goods, or other issues, contact terminal staff or traffic management before registering the discrepancy.

4. Submit the reconciled loading list to the terminal admin after loading.
5. Collect the shipping documents from the document slots, ensuring you take the shipping documents for all the shipments you have loaded.
6. Scan the goods onto the correct vehicle in the driver app: Loading terminal.
7. Charge the forklift after you’re finished.
8. **Before Leaving the Terminal Area:**

– Don’t forget to check out via the QR code at the office or exit.

– (Your registration remains in the same browser you used to check in.)

– Ensure your units are correctly set before starting the drive.

Checklist During Unstaffed Hours:

1. After backing up to the gate, leave or collect the shipping documents at the terminal desk.
2. Unload or load the goods at the designated location.
3. Verify that everything is correct.
4. Any discrepancies should be checked immediately and registered in the app.
5. Scan the goods for unloading or loading.

Contaktinformation

Kontaktuppgifter terminal / terminaladministration / trafiken DC Sto

Terminal Jordbro
Sunday 07:00- Friday 19:00
08-41080192, 41080193,41080194

Terminaladministration

Daytime
Mon – Fri 09:00-18:00
0737707515

Nattid
Sun – Fri 23:00-07:30
0738567154

Trafic / DC STO
Mån – Fre 07:00-17:00
0841080159

Jouren
0102799949
jourinrikes.frigo.se@frigoscandia.com