Unloading at DC7 Umeå Terminal

The terminal is typically staffed on weekdays, excluding holidays, from 05:00 to 14:00.

Checklist after arrival during staffed hours:

1. Enter the terminal and leave the freight documents with the terminal personnel or place them on the terminal desk.
2. Unload the cargo at the designated location.
3. Verify with terminal personnel that everything is correct.
4. Any discrepancies should be checked immediately. These will be recorded by terminal personnel.
5. The cargo is scanned upon arrival by terminal personnel.

Checklist after arrival during unstaffed hours:

1. Enter the terminal and leave the freight documents on the terminal desk.
2. Unload the cargo at the designated location.
3. Verify that everything is correct.
4. Any discrepancies should be checked immediately. These will be recorded in the app.
5. The cargo is scanned upon arrival.
6. Place the truck on charging once you are finished.

Loading at DC7 Umeå Terminal:

1. Check the settings on the equipment and the cooling compartment, see the instruction videos in the driver’s app.
2. Retrieve the loading list from the document tray at the terminal desk.
3. Verify the goods against the loading list to ensure you load the correct shipments, and mark the shipments loaded onto the vehicle.
4. Does the number of transport collies (pallets, boxes, etc.) match the loading list?
5. Are there any damages to the cargo? Is it entirely clean?
6. If there is suspicion of a temperature deviation, perform a temperature check.
7. In case of discrepancies, missing goods, or other issues, contact terminal personnel or traffic controllers.

After loading:

1. Leave the completed loading list in the document tray at the terminal desk.
2. Take the freight documents from the document tray at the terminal desk, ensuring you take documents for all the shipments you loaded.
3. Scan the cargo on the correct vehicle in the driver’s app: Loading terminal.
4. Place the truck on charging once you are finished.

Before leaving the terminal area: Do not forget to check out via QR code at the office or exit. Your registration remains in the same browser you used to check in. Don’t forget to check that your equipment is correctly set up before starting your journey.

Kontaktinformation

Terminal

Mon-Fri 05.00-14.00
090-3400714 el 090-3400715

Transpor office

Mon-Fri  07.00-17.00
090-3400710